Show simple item record

contributor authorJason Cain
contributor authorScott Case
contributor authorJohn Lesko
date accessioned2017-05-08T21:31:12Z
date available2017-05-08T21:31:12Z
date copyrightAugust 2009
date issued2009
identifier other%28asce%291090-0268%282009%2913%3A4%28325%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54594
description abstractThis paper discusses the development of a novel test fixture for applying a uniform radial stress to cylindrical composite laminates in such a way as to eliminate bending moments and axial loads. This fixture requires the use of easily fabricated poly-tetrafluoroethylene (PTFE) ring seals. These seals, which fit just inside the composite sample, are designed to be internally pressurized in the fixture and expand outwards, applying a uniform radial load to the sample. The results of mechanics analyses of the PTFE ring seal and composite sample are presented, which estimate the radial stress applied to the composite sample as a fraction of the applied internal hydraulic pressure. Further, results are presented from a prolonged hygrothermal aging study, in which the E-glass/epoxy, cylindrically wound composite samples are aged under varying hygrothermal conditions (ambient dry; and 30, 40, and
publisherAmerican Society of Civil Engineers
titleTesting of Hygrothermally Aged E-Glass/Epoxy Cylindrical Laminates Using a Novel Fixture for Simulating Internal Pressure
typeJournal Paper
journal volume13
journal issue4
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2009)13:4(325)
treeJournal of Composites for Construction:;2009:;Volume ( 013 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record