Show simple item record

contributor authorMônica Garcez
contributor authorLeila Meneghetti
contributor authorLuiz Carlos da Silva Filho
date accessioned2017-05-08T21:31:08Z
date available2017-05-08T21:31:08Z
date copyrightOctober 2008
date issued2008
identifier other%28asce%291090-0268%282008%2912%3A5%28522%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54551
description abstractThe use of fiber-reinforced polymers (FRPs) to poststrengthen concrete structures started to be investigated in the mid-1970s and today is widely recognized as an attractive technique to be used in civil structures, especially when aggressive environments prevent the use of materials that are susceptible to corrosion, such as steel. Different FRP poststrengthening techniques have been developed and applied in existing structures, aiming to increase their load capacity. Most FRP systems used nowadays consist of carbon fibers embedded in epoxy matrix. Regardless of the advantages and the good results achieved using carbon fiber-reinforced polymers, some new possibilities, such as the use of prestressing and lower cost fiber materials, are being analyzed in an attempt to provide viable alternatives for a more efficient, safe, and rational use of FRP systems. The main purpose of the present work was to make a comparative analysis of the behavior of reinforced concrete beams poststrengthened with carbon, aramid, and glass FRP subjected to static loading tests. Experimental results were evaluated against theoretical ones obtained through an analytical model that considers a trilinear behavior for the load versus displacement curves. The experimental results indicate that all FRP systems applied have appropriate structural performance for use in poststrengthening applications of RC. The choice of the more suitable system would, therefore, be strongly influenced by circumstances regarding cost limitations and level of reinforcement required.
publisherAmerican Society of Civil Engineers
titleStructural Performance of RC Beams Poststrengthened with Carbon, Aramid, and Glass FRP Systems
typeJournal Paper
journal volume12
journal issue5
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2008)12:5(522)
treeJournal of Composites for Construction:;2008:;Volume ( 012 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record