Show simple item record

contributor authorDanielle D. Kleinhans
contributor authorJohn J. Myers
contributor authorAntonio Nanni
date accessioned2017-05-08T21:31:00Z
date available2017-05-08T21:31:00Z
date copyrightOctober 2007
date issued2007
identifier other%28asce%291090-0268%282007%2911%3A5%28545%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54477
description abstractA primary means of demonstrating the feasibility and effectiveness of fiber-reinforced polymer (FRP) composite bridge materials is via in situ bridge load testing. For this study, the prescribed or assumed design factors for each of the study bridges were compared to those exhibited by the performance of the bridge. Specifically, the wheel load distribution factors and impact factors as defined by AASHTO were considered in order to assess the load transfer and distribution in structures utilizing FRP panels. The in situ testing configurations for the study bridges are outlined, including the truck and instrumentation placement to obtain the desired information. Furthermore, comparisons were drawn between the design values for deflection and those experienced by the structures during testing. It was found that although the deflections exhibited by the bridges were well within the design limits, further research is needed to be able to prescribe bridge design factors for FRP panels.
publisherAmerican Society of Civil Engineers
titleAssessment of Load Transfer and Load Distribution in Bridges Utilizing FRP Panels
typeJournal Paper
journal volume11
journal issue5
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2007)11:5(545)
treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record