Show simple item record

contributor authorAmnon Katz
date accessioned2017-05-08T21:30:59Z
date available2017-05-08T21:30:59Z
date copyrightAugust 2007
date issued2007
identifier other%28asce%291090-0268%282007%2911%3A4%28410%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54461
description abstractThis study investigated the mechanism of stress transfer between glass and carbon fiber-reinforced polymer (FRP) laminates and concrete beams with deteriorated surfaces. Thirty-six beams were prepared with either a solid concrete cross section, or with a weak concrete layer at the surface, simulating the state of a deteriorated surface. The beams were reinforced with glass or carbon FRP sheets and tested in flexure. Strain development in the laminate and in the concrete layers was recorded and analyzed. The mode of failure changed from shear within the deteriorated layer of concrete to delamination at the interface between the resin and the concrete in the solid high-strength concrete. A significant amount of stress was transferred between the FRP laminates and the concrete surface probably by residual frictional stresses after shear cracks developed in the deteriorated layer, leading to a remarkable load bearing capacity of these beams.
publisherAmerican Society of Civil Engineers
titleStress Transfer between FRP Laminates and Concrete through Deteriorated Concrete Surfaces
typeJournal Paper
journal volume11
journal issue4
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2007)11:4(410)
treeJournal of Composites for Construction:;2007:;Volume ( 011 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record