Show simple item record

contributor authorI. Puente
contributor authorA. Insausti
contributor authorM. Azkune
date accessioned2017-05-08T21:30:55Z
date available2017-05-08T21:30:55Z
date copyrightDecember 2006
date issued2006
identifier other%28asce%291090-0268%282006%2910%3A6%28529%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54410
description abstractThis paper presents the results of an experimental study concerning the buckling characteristics of pultruded columns with a hollow circular cross section. Commercially available structural elements were selected from three different manufacturers. Resonant frequency and short-column strength were use to obtain the bending stiffness and the local buckling load of the material. Based on such experimental work, a new design method is proposed herein following Maquoi and Rondal’s formulation. The proposed method has been verified experimentally with test results of hollow rectangular closed section columns and also with experimental work gathered from the literature. In all cases, the method developed in this project proved to be successful. Finally, such method was compared with Barbero and Tomblin’s method, showing some differences in the values predicted with the two methods. Some experimental results, which were predicted accurately with the method proposed herein, were overestimated with Barbero and Tomblin’s method.
publisherAmerican Society of Civil Engineers
titleBuckling of GFRP Columns: An Empirical Approach to Design
typeJournal Paper
journal volume10
journal issue6
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2006)10:6(529)
treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record