Show simple item record

contributor authorOmar Chaallal
contributor authorMunzer Hassan
contributor authorMichel LeBlanc
date accessioned2017-05-08T21:30:51Z
date available2017-05-08T21:30:51Z
date copyrightFebruary 2006
date issued2006
identifier other%28asce%291090-0268%282006%2910%3A1%284%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54350
description abstractThis paper presents results of an experimental investigation on half-scale concrete columns retrofitted with externally bonded fiber reinforced polymers (FRP). It then reviews six selected confinement models and three North American design guidelines for circular columns retrofitted with FRP and provides an in-depth comparison between experimental test results, models predictions, and values obtained using the guidelines. The comparison, which is carried out in terms of the confined to unconfined strengths, but also in terms of the gain in the load carrying capacity, considers the following parameters: The FRP confinement ratio, the unconfined concrete strength, and the elastic and mechanical properties of FRP. The results of this investigation indicated that for columns made of lower strength concrete, existing models and guidelines overestimate the confined concrete strength, and hence, the load carrying capacity of the columns.
publisherAmerican Society of Civil Engineers
titleCircular Columns Confined with FRP: Experimental versus Predictions of Models and Guidelines
typeJournal Paper
journal volume10
journal issue1
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2006)10:1(4)
treeJournal of Composites for Construction:;2006:;Volume ( 010 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record