| contributor author | Theofanis D. Krevaikas | |
| contributor author | Thanasis C. Triantafillou | |
| date accessioned | 2017-05-08T21:30:44Z | |
| date available | 2017-05-08T21:30:44Z | |
| date copyright | April 2005 | |
| date issued | 2005 | |
| identifier other | %28asce%291090-0268%282005%299%3A2%28128%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/54296 | |
| description abstract | The application of fiber-reinforced polymer (FRP) as a means of increasing the axial capacity of masonry through confinement, a subject not addressed before, is investigated in this study. Four series of uniaxial compression tests, with a total of 42 specimens, were conducted on model masonry columns with these variables: number of layers, radius at the corners, cross-section aspect ratio, and type of fibers. It is concluded that, in general, FRP-confined masonry behaves very much like FRP-confined concrete. Confinement increases both the load-carrying capacity and the deformability of masonry almost linearly with the average confining stress. The uniaxial compression test results enabled the development of a simple confinement model for strength and ultimate strain of FRP-confined masonry. This model is consistent with the test results obtained here but should attract further experimental verification in the future to account for types of masonry materials other than those used in this study. | |
| publisher | American Society of Civil Engineers | |
| title | Masonry Confinement with Fiber-Reinforced Polymers | |
| type | Journal Paper | |
| journal volume | 9 | |
| journal issue | 2 | |
| journal title | Journal of Composites for Construction | |
| identifier doi | 10.1061/(ASCE)1090-0268(2005)9:2(128) | |
| tree | Journal of Composites for Construction:;2005:;Volume ( 009 ):;issue: 002 | |
| contenttype | Fulltext | |