Show simple item record

contributor authorM. Saribiyik
contributor authorP. D. Gosling
date accessioned2017-05-08T21:30:42Z
date available2017-05-08T21:30:42Z
date copyrightDecember 2004
date issued2004
identifier other%28asce%291090-0268%282004%298%3A6%28549%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54274
description abstractIn this paper the physical behaviors of a connection assembly comprising a molded glass reinforced plastic [plastic fiber reinforced polymer (PFRP)] connector unit currently commercially manufactured from sheet molding compound and two pultruded PFRP box section beams/columns are examined. A detailed review highlights the apparent lack of research in this area. A limited number of studies have indicated the potential benefits of this joining technology in comparison to mimicking steel-type connections in which ductility is exploited. Reflecting the internal asymmetries of the connector unit, rotationally similar tests have been undertaken in which the connection assembly has been subjected to loading and boundary conditions inducing predominantly shear and bending states, respectively. Load-displacement characteristics, strain measurements, and failure modes are reported. In the context of the basic geometric design of the connector unit and low strength parent material, the connection assembly is shown to perform well, mobilizing up to 26% of the ultimate bending strength of the pultruded box section and demonstrating the potential of the joining technology.
publisherAmerican Society of Civil Engineers
titleExperimental Study of a Bonded Plastic Fiber Reinforced Polymer Connector Assembly
typeJournal Paper
journal volume8
journal issue6
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2004)8:6(549)
treeJournal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record