Show simple item record

contributor authorJoseph M. Tripi
contributor authorCharles E. Bakis
contributor authorThomas E. Boothby
contributor authorAntonio Nanni
date accessioned2017-05-08T21:30:23Z
date available2017-05-08T21:30:23Z
date copyrightMay 2000
date issued2000
identifier other%28asce%291090-0268%282000%294%3A2%2885%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/54058
description abstractA detailed experimental investigation of local and global deformations of tensile-loaded, cracked, rectangular, concrete prisms reinforced with externally bonded carbon fiber reinforced polymer (CFRP) sheets was carried out. High and low modulus sheets were applied using three different thicknesses of epoxy interlayer between the sheet and concrete. It was found that the stiffness of the CFRP sheet had a dominant effect on global tension stiffening, whereas interlayer thickness had a dominant effect on local load transfer and damage formation. Thicker interlayers transferred load into through-cracked concrete over longer transfer zones, thereby increasing the spacing of subsequent cracks in the concrete. The combined effect on global stiffness of changes in transfer zones and crack spacing due to interlayer thickness was negligible. Increasing the stiffness of the CFRP sheet resulted in considerably increased global tension stiffening. Full field strain measurements by moiré interferometry revealed detailed information about local load transfer in the CFRP sheet, epoxy interlayer, and concrete in the vicinity of cracks.
publisherAmerican Society of Civil Engineers
titleDeformation in Concrete with External CFRP Sheet Reinforcement
typeJournal Paper
journal volume4
journal issue2
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(2000)4:2(85)
treeJournal of Composites for Construction:;2000:;Volume ( 004 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record