Show simple item record

contributor authorRichard E. Chambers
date accessioned2017-05-08T21:30:13Z
date available2017-05-08T21:30:13Z
date copyrightFebruary 1997
date issued1997
identifier other%28asce%291090-0268%281997%291%3A1%2826%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/53967
description abstractThis paper presents the results of the first phase of a project to develop a national consensus standard for the design, fabrication, and erection of structures constructed from pultruded fiber-reinforced-plastic structural plate, rod, and shapes. The project was undertaken by ASCE for the Pultrusion Industry Council of the Society of the Plastics Industry, Inc. The scope of Phase 1 comprises a literature survey to assemble background information for the effort, and the development of a draft outline of the standard (i.e., a “prestandard”). The effort and significant findings are discussed in this paper. It presents the proposed prestandard outline, which is annotated to include the scope of each chapter and a brief commentary on anticipated provisions. The load and resistance factor design (LRFD) philosophy, which is the basis of the prestandard, is also discussed. Design criteria, engineering properties and factors, and ancillary standards that are needed in order to implement design via the proposed approach are identified. Detailed development of the prestandard is warranted, and should commence—at an accelerated pace.
publisherAmerican Society of Civil Engineers
titleASCE Design Standard for Pultruded Fiber-Reinforced-Plastic (FRP) Structures
typeJournal Paper
journal volume1
journal issue1
journal titleJournal of Composites for Construction
identifier doi10.1061/(ASCE)1090-0268(1997)1:1(26)
treeJournal of Composites for Construction:;1997:;Volume ( 001 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record