Show simple item record

contributor authorVictor M. Taboada-Urtuzuástegui
contributor authorRicardo Dobry
date accessioned2017-05-08T21:26:21Z
date available2017-05-08T21:26:21Z
date copyrightDecember 1998
date issued1998
identifier other%28asce%291090-0241%281998%29124%3A12%281195%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/51485
description abstractThis paper presents results of 11 centrifuge model tests of liquefaction and earthquake-induced lateral spreading in sand using a laminar box. The centrifuge experiments simulate a horizontal or sloping, 10-m thick stratum of water-saturated homogeneous coarse sand of infinite lateral extent and relative density 40–45%, placed on an impervious rigid base. Such homogeneous, clean, coarse stratum represents some field liquefaction situations, but not others involving fine and/or silty sands or strong layering of strata of different permeabilities. The centrifuge tests presented provide significant general insight into mechanisms and parameters influencing the lateral spreading phenomenon. The layer was subjected to lateral base shaking with a prototype peak acceleration ranging from 0.17 to 0.46
publisherAmerican Society of Civil Engineers
titleCentrifuge Modeling of Earthquake-Induced Lateral Spreading in Sand
typeJournal Paper
journal volume124
journal issue12
journal titleJournal of Geotechnical and Geoenvironmental Engineering
identifier doi10.1061/(ASCE)1090-0241(1998)124:12(1195)
treeJournal of Geotechnical and Geoenvironmental Engineering:;1998:;Volume ( 124 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record