Show simple item record

contributor authorSuresh P. Pai
contributor authorDavid W. Jensen
date accessioned2017-05-08T21:16:03Z
date available2017-05-08T21:16:03Z
date copyrightJanuary 2001
date issued2001
identifier other%28asce%290893-1321%282001%2914%3A1%2821%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/44934
description abstractThis paper describes a method for improving the accuracy of buckling predictions of thin-shell, filament-wound cylinders under axial compression loads using enhanced finite-element models. This is accomplished by incorporating the out-of-plane displacements due to residual strains, in addition to realistic stiffness coupling due to fiber undulations, into finite-element models. The out-of-plane displacements of filament-wound cylinders were scanned mechanically and incorporated into the finite-element models using a computer program. An eigenvalue buckling analysis was performed on these models. Results show that the accuracy of the buckling load prediction of the model with stiffness coupling and out-of-plane displacements due to residual strains is significantly improved compared to the case when only the stiffness coupling is incorporated into the model.
publisherAmerican Society of Civil Engineers
titleInfluence of Residual Strains on Buckling of Thin Filament-Wound Cylinders in Axial Compression
typeJournal Paper
journal volume14
journal issue1
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)0893-1321(2001)14:1(21)
treeJournal of Aerospace Engineering:;2001:;Volume ( 014 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record