Show simple item record

contributor authorCraig W. Smart
contributor authorDavid W. Jensen
date accessioned2017-05-08T21:15:54Z
date available2017-05-08T21:15:54Z
date copyrightJanuary 1997
date issued1997
identifier other%28asce%290893-1321%281997%2910%3A1%287%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/44846
description abstractAn experimental investigation was conducted to determine the flexural characteristics of advanced composite grid reinforced-concrete structures. Concrete beams reinforced with orthogonal grids composed of corrosion-resistant fiber-reinforced polymer composites (carbon/vinyl-ester and fiberglass/vinyl-ester) were compared to standard steel-reinforced beams. Flexure tests were performed on 26 0.762 mm (30 in.) long beams with a 0.1524 mm (6 in.) square cross section under four-point bending. The various test configurations incorporated #3 steel-reinforcing bars and/or composite grids with 0.0508 or 0.1016 mm (2 or 4 in.) spacing. The flexural strength, stiffness, and failure characteristics were evaluated by monitoring the load, deflection, and strain coupled with visual observation. The present study provides insight into the relevant load-transfer mechanisms, geometric issues, and dependence on material properties. The results show that the behavior of composite grid reinforced beams can be predicted with the same accuracy as traditional steel reinforcement enabling a simple, straightforward extension of existing design criteria. Composite grids designed and fabricated to have the same axial rigidity as steel rebar result in equal deflections for equal loads and significantly higher ultimate strengths, with reduced toughness due to the linear elastic characteristics of the reinforcement materials.
publisherAmerican Society of Civil Engineers
titleFlexure of Concrete Beams Reinforced with Advanced Composite Orthogrids
typeJournal Paper
journal volume10
journal issue1
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)0893-1321(1997)10:1(7)
treeJournal of Aerospace Engineering:;1997:;Volume ( 010 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record