| description abstract | Abstract. A study was conducted on high-temperature hardness of multifunctional polyphenylene sulfide (PPS)-matrix composite containing carbon fibers (CFs), graphite flakes (Gr), and polytetrafluoroethylene (PTFE). The PPS matrix offers excellent mechanical properties, thermal stability, and chemical resistance at high temperatures. Carbon fibers are added as reinforcement to improve strength and stiffness. Graphite flakes and carbon fibers are good thermal conductors for thermal management. PTFE and graphite are solid-state lubricants for tribological improvements. Thus, CF/Gr/PTFE/PPS material is truly multifunctional due to the attractive combined mechanical, thermal, and tribological properties of its constituents. The high temperature referred to the temperature near, at, and above the composite glass transition. The Rockwell hardness (M scale) was determined from room temperature to 155 °C. Hardness of the composite was found to decrease monotonically with increasing temperature, particularly above its glass transition temperature. At high temperature, rigid carbon fibers and graphite carried significant indentation load and constrained segmental chain mobility, thus preserving composite hardness. The injection-molded PPS-matrix composite had flow-induced carbon fiber orientation. The composite with transverse fibers had the highest transverse hardness, while the composite with randomly oriented fibers saw an increase in hardness. The composite hardness was directionally dependent and had a linear relationship with its yield strength at high temperature, but its proportionality changed above and below its glass transition. The relationship enables subsequent prediction of composite tribological behavior based on basic yield property and provides insight into the roles of high temperature and plastic yielding on friction and wear. | |
