Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy: Recent submissions
Now showing items 81-100 of 152
-
Developing a Pareto Front for Thermally Processed Loose
(The American Society of Mechanical Engineers (ASME), 2025)This investigation focused on the optimization of pre-treatment conditions of -
Computational Fluid Dynamics Analysis of Solidification in Baffled Molten Salt-Air-Cooled Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 2025)Due to their high freezing point, molten salt heat exchangers face the problem of salt freezing during cyclic operation. As a result, it is critical to detect the onset of salt solidification and anticipate the phase change ... -
Optimization of Chamber Structure and Ignition of a Rotary Engine Based on the Multi-Population-Subgroup Genetic Algorithm
(The American Society of Mechanical Engineers (ASME), 2025)The rotary engine (RE) is characterized by high-speed and a long and narrow combustion chamber. This leads to problems such as uneven distribution of the fuel–air mixture, difficulty in the ignition, and difficulty in rapid ... -
Analysis of the Impact of Vault Structures on Hydrogen Behavior and Risks in Hydrogen Production Plants
(The American Society of Mechanical Engineers (ASME), 2025)The safety risks associated with hydrogen production plants are significant and warrant close attention. Investigating the effects of vault structures on the dispersion and risks of leaked hydrogen can inform assessments ... -
Mathematical-Programming-Based Optimization of Alkaline Water Electrolyzer for Green Hydrogen Production
(The American Society of Mechanical Engineers (ASME), 2025)Hydrogen plays a crucial role in the energy sector toward sustainability and is essential for decarbonizing various sectors of national and international economics. Water electrolysis powered by renewable sources is an ... -
Reviewer’s Recognition
(The American Society of Mechanical Engineers (ASME), 2025)The Editor-in-Chief and Editorial Board of the ASME Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy would like to thank all the reviewers for volunteering their expertise and time reviewing ... -
Characteristics of Fuel-Borne Nitrogen Pollutants in Hydrogen–Ammonia Mixtures Using Argon–Oxygen Atmosphere Under Engine Conditions
(The American Society of Mechanical Engineers (ASME), 2025)Amid climate change, reducing reliance on fossil fuels and transitioning to renewable energy sources is crucial. Ammonia, a carbon-free and renewable fuel, shows significant potential as an alternative energy source. By ... -
Comparison of Pea Coal Combustion in a Novel Burner With Separated Primary and Secondary Air With Combustion in a Typical Retort Burner
(The American Society of Mechanical Engineers (ASME), 2025)Pea coal remains a significant fuel source for heating residential and public buildings, particularly in areas without access to centralized heating or gas networks. Recently, there has been growing interest in upgrading ... -
Analysis of Absorption-Compression Hybrid Refrigeration Systems for Using Low-Temperature Heat Sources
(The American Society of Mechanical Engineers (ASME), 2025)The main objective of this study is to explore and compare the energy and exergy performance of main configurations of nonhybrid (conventional), hybrid (with low- and high-pressure-side booster compressor), and absorption ... -
Study on Leak Detection of the Vehicle Fuel Evaporation System Based on the Positive Pressure Method
(The American Society of Mechanical Engineers (ASME), 2025)- -
Optimized Multiclass Fault Detection in Solar Photovoltaic Modules Using TinySqueezeNet With Minimal Computational Overhead
(The American Society of Mechanical Engineers (ASME), 2025)- -
The Use of Recycled Catalyst for the Molten Carbonate Fuel Cell Fueled by Methane
(The American Society of Mechanical Engineers (ASME), 2025)This article describes an experimental study and mathematical modeling of a molten carbonate fuel cell (MCFC) powered by methane thanks to the use of a recycled catalyst in the anode channel of the cell. The catalyst was ... -
Impact of Metal Oxide Nanoparticles in Waste Plastic Oil on Diesel Engine Performance, Combustion, Emissions, and Tribology
(The American Society of Mechanical Engineers (ASME), 2025)- -
Numerical and Experimental Studies of Fluidized Bed Reactors for Adsorption Cooling and Desalination Systems
(The American Society of Mechanical Engineers (ASME), 2025)Fluidization is widely utilized in various industrial processes due to its advantages, such as efficient material mixing, uniform temperature distribution, and enhanced heat and mass transfer between solids and the fluid. ... -
Performance Analysis of Pinewood, Bamboo, and Plywood Gasification in a Fluidized Bed Gasifier
(The American Society of Mechanical Engineers (ASME), 2025)In emerging economies such as India, there is an increasing need for energy, leading to an enhanced reliance on fossil fuels. To reduce global warming caused by fossil fuel consumption, gasification must be promoted to ... -
Optimization of Methanol Cracking Gas Blending Ratios and Diesel Injection Timing for Combustion and Emissions Control in Marine Engines
(The American Society of Mechanical Engineers (ASME), 2025)To improve the thermal efficiency of marine engines and reduce NOX emission, the heat of waste gas is recycled to heat cracking methanol and the diesel micro-injection ignition method. The effects of methanol cracking gas ... -
Hybrid Algorithm Approach for Driving Distribution Static Compensator in Multiple Renewable Energy Systems
(The American Society of Mechanical Engineers (ASME), 2025)There has been a recent drive toward integration of renewable energy resources into the main grid to improve the environmental aspects of the energy generation sector. The integration brings about stability and quality ... -
Computational Analysis on the Effect of Methanol Energy Ratio on the Spray and Combustion Pattern of a Dual-Fuel Compression Ignition Engine
(The American Society of Mechanical Engineers (ASME), 2025)Methanol is gaining significant attention for its potential in green energy production and its easy handling and storage. Using methanol in conjunction with diesel, under dual operation, does not require significant hardware ... -
The Study on the Working Characteristics of Gaseous Premixing in a Kerosene/Air-Rotating Detonation Combustor
(The American Society of Mechanical Engineers (ASME), 2025)To enable stable performance in a rotating detonation combustor (RDC) operating with aviation fuel and air mixtures, this study develops a novel RDC configuration for hydrocarbon/oxidizer systems. The experimental investigation ... -
Numerical Investigation of Ammonia/n-Heptane Dual-Fuel Spray Flames Using Large Eddy Simulations
(The American Society of Mechanical Engineers (ASME), 2025)Diesel engines are extensively used in heavy-duty transportation, power generation, and marine vehicles due to their superior thermal efficiency and extended high-load operability compared to spark ignition (SI) engines. ...