| description abstract | Over the last 15 years, microbially induced calcite precipitation (MICP) has emerged as a possible solution to mitigate coastal erosion. To date, most MICP soil treatments that have been studied involve column injection using a pump. In recent years, MICP application through surface percolation has gained traction as an alternative technique, but data using this technique are limited. More recently, a new treatment recipe/technique was developed, and this technique was termed bioslurry. Like most MICP studies, research with bioslurry has concentrated on the column injection method, and surface percolation has received very limited attention. This paper discusses the treatment of Florida beach sand by surface percolating bioslurry. Researchers experimented with variations of the bioslurry recipe to optimize erosion resistance, which was assessed using a pocket erodometer combined with physical measurements. In addition, treated specimen morphology was preliminarily examined using X-ray diffraction and scanning electron microscopy. Results showed that erosion resistance was maximized when 15% to 25% of the specimens’ pore volumes were filled with bioslurry and that this erosion resistance may be sufficient to withstand worst-case storm events after only one treatment. In addition, previous researchers always used a relatively long (i.e., ∼12 h) stir time when preparing bioslurry. Results presented here show that it may be possible to produce comparable data with much shorter stir times (i.e., 1 to 2 h). | |
