| description abstract | This paper aims to evaluate the seismic response of multitiered buckling-restrained braced frames (MT-BRBFs), assess the design provisions specified by the 2022 AISC Seismic Provisions for multitiered BRBFs, and propose improvements to these provisions. A set of 17 frames is first selected by varying bracing configuration, frame height, number of tiers, and tier height ratio. The frames are then designed in accordance with the 2010 and 2022 AISC Seismic Provisions. A numerical parametric study is performed under scaled ground motion accelerations. The results of the parametric study show that when the frames are designed to the 2010 provisions, the frame inelastic deformation tends to concentrate in the tier(s) undergoing tensile yielding due to their lower postyield stiffness, compared to BRBs yielding in compression, which creates unequal story shear, contributed by braces, in adjacent tiers with BRBs in tension and compression and engages column flexure to compensate for unbalanced brace story shears between tiers. Columns experience yielding and even buckling in several cases due to combined flexural and axial load demands. MT-BRBFs designed to the 2022 AISC Seismic Provisions exhibit a more uniform deformation response between tiers and relatively lower flexural demands in their columns. However, these provisions may overestimate column in-plane flexural demands (on the order of 3), resulting in potentially uneconomical design solutions. On the basis of the numerical simulations, modifications are proposed to compression BRBs’ adjusted strength to better estimate column in-plane flexure and tier deformation while achieving an economical column design. The proposed improvements are validated using dynamic analyses. | |
