Show simple item record

contributor authorTaylan Günay
contributor authorPerviz Ahmedzade
date accessioned2024-04-27T22:57:19Z
date available2024-04-27T22:57:19Z
date issued2024/03/01
identifier other10.1061-JMCEE7.MTENG-16519.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297918
description abstractIn this study, nanocomposite-modified bitumens were prepared and mechanically tested as an alternative to polymer-modified binder. Halloysite nanotube and sepiolite nanoclay were employed along with some polymers to form nanocomposites through the melt intercalation method. The storage stability of the nanocomposite-modified bitumens was tested to evaluate the compatibility. Conventional tests were conducted to compare the physical changes after nanocomposite modification. The viscosity of the nanocomposite-modified binders was determined using a rotational viscometer. Finally, the high- and low-temperature performance grades were evaluated using a rheological testing program. The results showed that the compatibility of the nanocomposites was within acceptable limits, while certain nanocomposite types significantly increased the stiffness of bitumen compared to polymer modifiers alone, resulting in an improvement in the physical performance of bitumen.
publisherASCE
titlePhysical Investigation of Polymer Nanocomposite-Modified Bitumens Containing Halloysite Nanotube and Sepiolite Nanoclay
typeJournal Article
journal volume36
journal issue3
journal titleJournal of Materials in Civil Engineering
identifier doi10.1061/JMCEE7.MTENG-16519
journal fristpage04023630-1
journal lastpage04023630-11
page11
treeJournal of Materials in Civil Engineering:;2024:;Volume ( 036 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record