Show simple item record

contributor authorTinu Valsa Paul
contributor authorGeorge Vadakkekara Itty
contributor authorThirunavukkarasu Indiran
date accessioned2023-11-27T23:02:21Z
date available2023-11-27T23:02:21Z
date issued8/22/2023 12:00:00 AM
date issued2023-08-22
identifier otherJAEEEZ.ASENG-3722.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4293237
description abstractIn this paper, an attempt has been made to implement the classical second order SMC for a nonlinear model of the Quadrotor with varied trajectories in a closed loop in simulation for the available model along with the model identified for Hexsoon Edu 450 Quadrotor. The controller is developed using an equivalent control technique that was realized using MATLAB. Because the quadrotor system is complex, the dynamic modeling has to be done by considering six degrees of freedom prior to the controller design. Primarily the attitude controllers of the quadrotor should be settled at the desired values. Then, the position controllers must be stabilized using effective tuning of the parameters of the controller. This paper presents a three-dimensional trajectory tracking of the quadrotor using a sliding mode controller (SMC) which is stable and accurate as per the comparison because the maneuvering of the quadrotor is a quick process. The results of the designed (SMC) are compared with a nonlinear PID controller in the literature. The result proved the robustness of the SMC against the uncertainties of the system compared with NPID.
publisherASCE
titleNonlinear Dynamic Modeling of a Quadrotor and Its Control Using Sliding Mode Controller
typeJournal Article
journal volume36
journal issue6
journal titleJournal of Aerospace Engineering
identifier doi10.1061/JAEEEZ.ASENG-3722
journal fristpage04023077-1
journal lastpage04023077-13
page13
treeJournal of Aerospace Engineering:;2023:;Volume ( 036 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record