| description abstract | The labyrinth side weir structure is an optimal solution to regulate and divert excess flows across rivers, and irrigation and drainage channels when the opening length of the side weir is limited. Changing the geometry of the side weir is considered one way to improve its efficiency. The present study investigates the hydraulic effects of stepped labyrinth side weirs to increase their discharge capacity. To estimate the outflow over symmetrical stepped labyrinth side weir, the discharge coefficient needs to be determined. Normal triangular labyrinth side weir in one cycle mode has been modified by increasing the crest path using different steps. A total of 417 experiments were conducted on normal and stepped side weirs for various weir opening lengths, weir heights, internal head angles, and hydraulic conditions. The results were analyzed and compared. It was found that efficiency improved, and the discharge coefficient increased as the number of the steps decreased. Furthermore, the water surface profile becomes more uniform with decreasing number of steps. A lower number of steps, smaller head angle, and high weir length produce a higher discharge coefficient by approximately 15%–35% compared to a normal triangular labyrinth side weir; in addition, the Knope length decreases by approximately 40%–70% for the same effective length. Additionally, a reliable equation to estimate the discharge coefficient of the stepped labyrinth side weir was presented. The results of this study can be used to design side weirs with high hydraulic performance when the weir-included angle selected is small or there is a lack of space. | |
