Show simple item record

contributor authorLiang Yin
contributor authorJiaqiang E
contributor authorJie Ding
date accessioned2022-08-18T12:12:22Z
date available2022-08-18T12:12:22Z
date issued2022/04/29
identifier other%28ASCE%29AS.1943-5525.0001445.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4286199
description abstractPlatelet injectors are quite different from other injectors because of the specificity of the manufacturing technology and spray characteristics. In this study, a splash platelet injector was designed to obtain its combustion characteristics. Gaseous oxygen and methane were used as the propellants. A three-dimensional (3D) model was used with a reduced mechanism involving 16 species and 41 reactions. The influence of the structural parameters of the splash platelet injector, that is, the nondimensional parameter (Δ), nozzle space (D), and scale factor (ξ), on combustion characteristics were analyzed. Results indicate that the temperature was nonuniform near the injector faceplate in all cases, and large corner recirculation zones were formed at the head of the combustion chamber. Combustion length (LC) decreased as Δ increased, and the shortest combustion length was obtained when Δ=3.5. The combustion characteristics at D=2.4  mm slightly differed from those at D=3.6  mm, and the combustion characteristics in the front part of the combustor at D=4.8  mm were worse. The scale factor had little effect on component and temperature distribution.
publisherASCE
titleNumerical Investigation of the Combustion Characteristics of GO2/GCH4 Splash Platelet Injector
typeJournal Article
journal volume35
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001445
journal fristpage04022052
journal lastpage04022052-10
page10
treeJournal of Aerospace Engineering:;2022:;Volume ( 035 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record