Effect of Graphene Nanoplatelets Reinforcement on Grindability of Zirconium Diboride Ceramics

Abstract

The effect of graphene nanoplatelets (GNPS) on the grindability of GNP reinforced ZrB2 was studied using a resin bonded diamond grinding wheel under dry and wet conditions. A comparative study of grinding forces was performed at selected wheel surface speeds and depths of cut for surface grinding. ZrB2-GNP showed lower normal grinding forces due to the improved fracture toughness and reduced hardness. The presence of GNP reinforcement in ZrB2 resulted in lower tangential forces and reduced specific grinding energy due to the role of GNP as a solid lubricant. The measured forces showed a good correlation with the micro cutting model for ZrB2 and ZrB2-GNP under dry conditions. The tangential forces showed the same trend as normal forces at different depths of cut and wheel surface speeds for ZrB2 and ZrB2-GNP with average force ratios of 0.3 and 0.35, respectively. The presence of porosity in ZrB2 increased the normal grinding forces during wet grinding. Scanning electron microscope (SEM) images of the grinding chips indicated a mixture of both the ductile mode and the brittle mode of material removal with predominantly brittle fractured chips. Energy-dispersive spectroscopy (EDS) confirmed the presence of GNPs in ZrB2-GNP grinding chips. The topography of the grinding wheel showed higher wheel loading after the dry grinding than that of wet grinding. The wet grinding resulted in relatively lower surface roughness (Ra values) than dry grinding.