| contributor author | Brandon J. Smith | |
| contributor author | Jonathan T. Black | |
| contributor author | Colin S. Adams | |
| date accessioned | 2022-05-07T21:21:55Z | |
| date available | 2022-05-07T21:21:55Z | |
| date issued | 2022-02-28 | |
| identifier other | (ASCE)AS.1943-5525.0001408.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4283635 | |
| description abstract | The development and calibration of a micronewton space thruster test stand is described. The test stand uses a torsion pendulum-type design. A calibration system consisting of a rarefied-flow, gas-dynamic thruster was used to provide a known reaction force to deflect the torsion pendulum arm. Under-damped oscillation dynamics of the arm are described. The novel displacement-sensing system consists of laser light reflected from the arm and recorded using a linear charge-coupled device (CCD). Calibration thruster pressure is transmitted via pulsed laser to an external receiver. Four experimental tests are discussed characterizing the displacement of the arm during active thrusting periods. The time-response of these displacements are used to experimentally infer the rigidity of the spring system. Micronewton-range thrust values on the order of 1 to 10 micronewtons were estimated to be produced by the calibration thruster. Additionally, the observed torsional rigidity was 1 to 3 times higher than the expected value based on the physical properties (i.e. wire diameter and material) of the system, reducing the precision of the torsion pendulum in its present form. Opportunities for further study and error reduction are also proposed. | |
| publisher | ASCE | |
| title | Design and Calibration of a Torsion Pendulum for Micronewton-Class Spacecraft Thrusters | |
| type | Journal Paper | |
| journal volume | 35 | |
| journal issue | 3 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/(ASCE)AS.1943-5525.0001408 | |
| journal fristpage | 04022023 | |
| journal lastpage | 04022023-9 | |
| page | 9 | |
| tree | Journal of Aerospace Engineering:;2022:;Volume ( 035 ):;issue: 003 | |
| contenttype | Fulltext | |