Show simple item record

contributor authorEmre Doruk
contributor authorFehim Fındık
contributor authorMurat Pakdil
date accessioned2022-05-07T21:19:19Z
date available2022-05-07T21:19:19Z
date issued2022-01-24
identifier other(ASCE)AS.1943-5525.0001403.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283580
description abstractThe new generation high-strength steel sheet has been widely used to reduce the vehicle weight. In this study, the mechanical, metallurgical, and fatigue behavior of the resistance spot-welded joints of high strength steel sheets were experimentally investigated. The Dual-Phase (DP) 800 and Twinning-Induced Plasticity (TWIP) 1000 steel sheets were joined together in three different nugget diameters. The welding current was parameterized to create three different nugget diameters. Hence, four groups of welded combining combinations were obtained. The tensile shear test was applied to the samples to study the effects of weld nugget diameter and different welded joint combination in terms of the joint strength. For long fatigue life tests, six test samples were prepared for each test series; in total, 24 tests have been conducted, in which S-N curves of the samples were extracted. Finally, the effect of different nugget diameters on the fatigue life of the welded joint combinations was investigated.
publisherASCE
titleMechanical and Fatigue Behavior of Resistance Spot Welded Dual-Phase and Twinning-Induced Plasticity Steel Joints
typeJournal Paper
journal volume35
journal issue3
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001403
journal fristpage04022007
journal lastpage04022007-8
page8
treeJournal of Aerospace Engineering:;2022:;Volume ( 035 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record