Show simple item record

contributor authorMassabò, Roberta
date accessioned2022-02-05T22:29:47Z
date available2022-02-05T22:29:47Z
date copyright12/14/2020 12:00:00 AM
date issued2020
identifier issn0021-8936
identifier otherjam_88_3_031014.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4277634
description abstractUpper and lower bounds for the parameters of one-dimensional theories used in the analysis of sandwich fracture specimens are derived by matching the energy release rate with two-dimensional elasticity solutions. The theory of a beam on an elastic foundation and modified beam theory are considered. Bounds are derived analytically for foundation modulus and crack length correction in single cantilever beam (SCB) sandwich specimens and verified using accurate finite element results and experimental data from the literature. Foundation modulus and crack length correction depend on the elastic mismatch between face sheets and core and are independent of the core thickness if this is above a limit value, which also depends on the elastic mismatch. The results in this paper clarify conflicting results in the literature, explain the approximate solutions, and highlight their limitations. The bounds of the model parameters can be applied directly to specimens satisfying specific geometrical/material ratios, which are given in the paper, or used to support and validate numerical calculations and define asymptotic limits.
publisherThe American Society of Mechanical Engineers (ASME)
titleUpper and Lower Bounds for the Parameters of One-Dimensional Theories for Sandwich Fracture Specimens
typeJournal Paper
journal volume88
journal issue3
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4049141
journal fristpage031014-1
journal lastpage031014-11
page11
treeJournal of Applied Mechanics:;2020:;volume( 088 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record