| contributor author | Hunt, Steven A. | |
| contributor author | Migliorino, Mario Tindaro | |
| contributor author | Scalo, Carlo | |
| contributor author | Heister, Stephen D. | |
| date accessioned | 2022-02-05T22:15:27Z | |
| date available | 2022-02-05T22:15:27Z | |
| date copyright | 1/18/2021 12:00:00 AM | |
| date issued | 2021 | |
| identifier issn | 0098-2202 | |
| identifier other | fe_143_04_040903.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4277222 | |
| description abstract | We have investigated supercritical-p (p > 1192 psi (8.22 MPa)) methanol at pressures up to 1645 psi (11.3 MPa) flowing through a heated tube at flow rates of 4–7 lb/h (1.8–3.2 kg/h). Tube heated lengths have been varied from 4 to 6 in (10 to 15 cm), internal diameters from 0.027 to 0.069 in (0.069 to 0.175 cm), and heat inputs between zero and 800 W. Fluid temperature at the tube inlet remained subcritical (T < 464 °F (513 K)); outlet temperatures were transcritical or supercritical. Two phenomena were observed: system-wide bulk-mode oscillations and localized acoustic modes. In this study, predictive efforts are undertaken to characterize system-wide bulk-mode oscillations. The parameter space has been nondimensionalized, yielding four dimensionless variables. Stability criteria based on these dimensionless groups have been established for two separate test articles and fluids; both criteria suggest that the heat required for the onset of oscillations is proportional to the mass flow rate times the mean pressure and inversely proportional to the fuel density. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Onset Criteria for Bulk-Mode Thermoacoustic Instabilities in Supercritical Hydrocarbon Fuels | |
| type | Journal Paper | |
| journal volume | 143 | |
| journal issue | 4 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.4049401 | |
| journal fristpage | 040903-1 | |
| journal lastpage | 040903-7 | |
| page | 7 | |
| tree | Journal of Fluids Engineering:;2021:;volume( 143 ):;issue: 004 | |
| contenttype | Fulltext | |