Show simple item record

contributor authorVeselá, J.
contributor authorMareš, P.
contributor authorZahrádka, P.
contributor authorPatera, J.
date accessioned2022-02-05T21:53:23Z
date available2022-02-05T21:53:23Z
date copyright11/16/2020 12:00:00 AM
date issued2020
identifier issn2332-8983
identifier otherners_007_02_024504.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4276524
description abstractThis article describes methods suitable for crack detection on low pressure steam turbine blades, not including the blade root. These cracks, which are initiated in the corrosion pitting, can cause serious damage to the steam turbine blade leading to its breakaway. Therefore, the detection of these cracks on the early stages of blade fracture is very important. Several methods for detecting of surface cracks (ultrasonic Rayleigh waves, eddy current with flexible array probe, etc.) has been tested on artificial flaws, which were manufactured into turbine blades. The comparison of all these methods is described as well as the evaluation of their advantages and disadvantages. Simulations of ultrasonic testing are also presented in this article.
publisherThe American Society of Mechanical Engineers (ASME)
titleEvaluation of Steam Turbine Blades Surface Cracks Detectability by Nondestructive Methods
typeJournal Paper
journal volume7
journal issue2
journal titleJournal of Nuclear Engineering and Radiation Science
identifier doi10.1115/1.4048479
journal fristpage024504-1
journal lastpage024504-4
page4
treeJournal of Nuclear Engineering and Radiation Science:;2020:;volume( 007 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record