Show simple item record

contributor authorMega, Mor
contributor authorDolev, Orly
contributor authorBanks-Sills, Leslie
date accessioned2022-02-04T22:50:34Z
date available2022-02-04T22:50:34Z
date copyright2/1/2020 12:00:00 AM
date issued2020
identifier issn0021-8936
identifier otherjam_87_2_021001.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4275547
description abstractSeveral two- and three-dimensional mixed-mode interface failure criteria are proposed for predicting delamination failure in multidirectional, laminate composites. The proposed criteria, based on the stress intensity factors K1, K2, and KIII, as well as the critical interface energy release rate Gic and phase angles ψ and ϕ, are examined using results obtained from Brazilian disk mixed-mode fracture toughness tests. Two material systems are considered. The first contains a delamination along an interface between a unidirectional fabric and a plain woven fabric. The second is composed of a plain woven fabric with fibers oriented in different directions in succeeding plies. The former was manufactured by means of a wet-layup and the latter is a prepreg. Finally, a statistical analysis is carried out to obtain a failure curve or surface with a 10% probability of unexpected failure and a 95% confidence. These curves or surfaces may be used to predict failure of structures containing these laminates and to assist in composite design.
publisherThe American Society of Mechanical Engineers (ASME)
titleTwo- and Three-Dimensional Failure Criteria for Laminate Composites
typeJournal Paper
journal volume87
journal issue2
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4045109
journal fristpage021001-1
journal lastpage021001-11
page11
treeJournal of Applied Mechanics:;2020:;volume( 087 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record