Show simple item record

contributor authorMichálek, P.
contributor authorPospíšil, S.
contributor authorMacháček, M.
contributor authorMichalcová, V.
date accessioned2022-02-04T22:04:55Z
date available2022-02-04T22:04:55Z
date copyright8/14/2020 12:00:00 AM
date issued2020
identifier issn0022-1481
identifier otherht_142_11_114503.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4274833
description abstractThe flow around a heated circular cylinder and the wake behind it were studied in wind tunnel flow using two methods of anemometry, i.e., particle image velocimetry (PIV) and constant temperature anemometry (CTA) with a special technique using a rotating slanted hot-wire probe. The Reynolds number ranged from 2000 to 20,000 and the cylinder wall temperatures varied between 27 °C and 177 °C. The wake is characterized by mean wind and fluctuation contour maps. Significant changes in wake patterns were observed while the cylinder was being heated, thus increasing its wall temperatures at low Reynolds numbers. At higher Reynolds numbers, the effects of cylinder heating on wake properties were negligible. The research fills a gap observed in the literature for a certain combination of velocity, cylinder aspect ratio, and cylinder surface temperature.
publisherThe American Society of Mechanical Engineers (ASME)
titleInvestigation of Flow Around and in Wake of a Heated Circular Cylinder at Moderate Reynolds Numbers
typeJournal Paper
journal volume142
journal issue11
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4047833
journal fristpage0111801-1
journal lastpage0111801-6
page6
treeJournal of Heat Transfer:;2020:;volume( 142 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record