Show simple item record

contributor authorEastwood, Kyle W.
contributor authorSwarup, Arushri
contributor authorFrancis, Peter
contributor authorAlvara, Alexander N.
contributor authorChen, Honzer
contributor authorLooi, Thomas
contributor authorNaguib, Hani E.
contributor authorDrake, James M.
date accessioned2022-02-04T14:28:45Z
date available2022-02-04T14:28:45Z
date copyright2020/02/18/
date issued2020
identifier issn1932-6181
identifier othermed_014_02_025002.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4273736
description abstractThis work presents the design of an articulate neuroendoscopic instrument (ANI), a handheld tool for use in minimally invasive neurosurgery. The instrument consists of a handle and a steerable tube-shaft with a distal end-effector. The design aims to increase the reach of surgeons operating through narrow channels within the center of the brain when approaching multiple targets from a single incision point. The steerable tube-shaft consists of a 1.6- mm notch-tube compliant joint mechanism augmented with contact-aids modeled after a gear geometry. The contact-aid geometry aims to address the performance tradeoff between stiffness, range-of-motion (RoM), and joint compactness for millimeter-scale notched-tube joints; it increases blocking force without sacrificing RoM. Finite element modeling (FEM) was used to refine design features, and the joint stiffness and RoM are assessed experimentally for three prototypes. The joint is incorporated into a tube-shaft instrument, and the assembled tool's stiffness properties are characterized. The prototype was then assessed in a validated neurosurgical simulator. An individual 1.24-mm outer-diameter notch-tube compliant joint with gear contact-aids is capable of 30 deg maximum bending and can sustain a 0.55 N blocking force with 0.5 mm displacement. A functional instrument shaft with a 15.5- mm-long articulating section was constructed from three joints in series with an external flexible stainless-steel sheath. It achieves a 6.7-mm bending radius at 75 deg maximum bending angle. In preclinical testing with an endoscopic third ventriculostomy and endoscopic tumor biopsy (ETV-ETB) simulator, the tool successfully completes the biopsy and fenestration maneuvers from a single burr-hole entry point. The ANI prototype uses contact-aid geometry incorporated into a compliant nitinol notched-tube joint to produce an articulate biopsy instrument for minimally invasive neurosurgical applications.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Steerable Neuroendoscopic Instrument Using Compliant Contact-Aided Joints and Monolithic Articulation
typeJournal Paper
journal volume14
journal issue2
journal titleJournal of Medical Devices
identifier doi10.1115/1.4045934
page25002
treeJournal of Medical Devices:;2020:;volume( 014 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record