Show simple item record

contributor authorStefan Letica
contributor authorW. Nathan Alexander
date accessioned2022-02-01T00:36:08Z
date available2022-02-01T00:36:08Z
date issued7/1/2021
identifier other%28ASCE%29AS.1943-5525.0001295.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4271725
description abstractTrailing edge noise is a common noise source in aerodynamic applications. Many prior experiments have shown that trailing edge serrations can reduce this noise, but the mechanism by which serrations reduce noise and their aerodynamic impact near the edge is not fully understood. Previous theoretical models have assumed that the turbulence convecting past a serrated trailing edge is unchanged by the presence of the serrations, but experiments have shown that this is not accurate. This work attempts to further the understanding of unsteady surface pressure fluctuations on sawtooth serrations. Experiments were performed in an anechoic wall-jet wind tunnel on an undercut trailing edge with a straight and serrated edge configuration. The magnitude of unsteady surface pressure fluctuations was found to increase near the tips of the serrations for Strouhal numbers near 0.5 based on edge thickness. Spanwise coherence was increased on a single serration, while coherence across the root of adjacent serrations was similar to results across a straight trailing edge at similar spanwise separation distance.
publisherASCE
titleUnderstanding the Impact of a Serrated Trailing Edge on the Unsteady Hydrodynamic Field
typeJournal Paper
journal volume34
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001295
journal fristpage04021045-1
journal lastpage04021045-10
page10
treeJournal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record