Show simple item record

contributor authorJavad Sepahi-Younsi
contributor authorSafa Esmaeili
date accessioned2022-01-30T21:38:24Z
date available2022-01-30T21:38:24Z
date issued9/1/2020 12:00:00 AM
identifier other%28ASCE%29AS.1943-5525.0001170.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268575
description abstractThe main objective of this paper is to study the effects of applying a heat source ahead of a supersonic mixed compression air intake. This intake has been designed for the freestream Mach number 2. Four parameters of the heat source, including its location, cross-sectional shape, cross-sectional area, and heat generation rate, are investigated numerically to find a suitable heat source that enhances the performance of the intake. The research is conducted at the freestream Mach numbers of 1.8, 2, and 2.2. Total pressure recovery, mass flow ratio, flow distortion, and drag coefficient are considered as the intake performance parameters. Variation of the critical backpressure is further investigated. The results show that a bow shock is formed around the heat source that affects the intake shock system and can have desirable effects on most of the performance parameters and the critical backpressure at different freestream Mach numbers. It is also observed that the heat source location is the most effective parameter of the heat source, and should be selected meticulously.
publisherASCE
titlePerformance Enhancement of a Supersonic Air Intake by Applying a Heat Source
typeJournal Paper
journal volume33
journal issue5
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001170
page14
treeJournal of Aerospace Engineering:;2020:;Volume ( 033 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record