Show simple item record

contributor authorIonut Stelian Pascariu
contributor authorSebastian Marian Zaharia
date accessioned2022-01-30T21:33:41Z
date available2022-01-30T21:33:41Z
date issued7/1/2020 12:00:00 AM
identifier other%28ASCE%29AS.1943-5525.0001154.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4268431
description abstractThe capacity to manufacture complex structures directly without the need for a mold gives additive manufacturing (AM) technologies a major advantage compared with conventional manufacturing. An interesting and challenging field is to manufacture unmanned aerial vehicle (UAV) components and models using three-dimensional (3D) printing. This study focuses on the design, preliminary aerodynamics analysis, manufacture, and assembly of a small UAV using fused deposition modeling (FDM) technology. From the preliminary aerodynamic analysis of the UAV model it was found that the highest Cl/Cd of the UAV model is 14.67 at a 4° angle of attack, which corresponds with cruise airspeed of 20  m/s. The UAV model developed in this paper presents dense ribs for wings and formers for fuselage, all of them manufactured by FDM technology. The study also includes a description of the 3D printing procedure of the components of the UAV model and the results of the flight tests. Following the flight tests, it can be said that the UAV model made by FDM technology is stable and has a wide airspeed range available, stall characteristics are good, and it operates with good aerodynamic characteristics and high maneuverability. Thus, the manufacturing technique presented in this paper can be used in the fast and efficient manufacture of scale aircraft prototypes with the purpose of determining the flight performance by conducting flight tests.
publisherASCE
titleDesign and Testing of an Unmanned Aerial Vehicle Manufactured by Fused Deposition Modeling
typeJournal Paper
journal volume33
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001154
page9
treeJournal of Aerospace Engineering:;2020:;Volume ( 033 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record