Show simple item record

contributor authorR. Timoney
contributor authorK. Worrall
contributor authorX. Li
contributor authorD. Firstbrook
contributor authorP. Harkness
date accessioned2022-01-30T20:14:19Z
date available2022-01-30T20:14:19Z
date issued2020
identifier other%28ASCE%29AS.1943-5525.0001139.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4266739
description abstractVolume-constrained robotic missions seeking to obtain samples from beneath a planetary subsurface may wish to use a rigid drill string consisting of multiple, individual drill bit sections connected together, as opposed to a single, lengthy drill bit. To ensure that drill strings can be assembled and disassembled reliably, it is essential that a robust connection system be used. The authors propose a geometry that seeks to address the requirements of such a mating interface. The proposed solution is based on the bayonet interface, using L- and T-shaped so-called female grooves and male studs connected and disconnected together through a series of clockwise and counterclockwise rotations and single-point clamping events. This routine allows the transfer of both percussion through the drill string and torque in both directions of rotation, while permitting the accurate disconnection of individual drills bits at the required location. Sustained laboratory and field drilling operations suggest that bayonet-style connections offer a reliable solution to the problem of autonomous assembly and disassembly of drill strings in a planetary exploration setting. This paper discusses the development of such a connection system, based on the bayonet connection, which has been implemented in the overall architecture of the Ultrasonic Planetary Core Drill (UPCD). The design trade-off study, which sought to evaluate the use of the bayonet system in comparison with the more conventional screw thread interface, will be discussed, alongside experimental results from percussion transmission testing and drill string assembly testing.
publisherASCE
titleDevelopment of a Robust Mating System for Use in the Autonomous Assembly of Planetary Drill Strings
typeJournal Paper
journal volume33
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001139
page04020040
treeJournal of Aerospace Engineering:;2020:;Volume ( 033 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record