Show simple item record

contributor authorKrzysztof Marchlewski
contributor authorŁukasz Łaniewski-Wołłk
contributor authorSławomir Kubacki
date accessioned2022-01-30T19:09:13Z
date available2022-01-30T19:09:13Z
date issued2020
identifier other%28ASCE%29AS.1943-5525.0001157.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4264754
description abstractWe discuss a methodology for multiobjective optimization of the U-shaped air-delivery duct, which is a part of a turboprop engine intake system. The methodology combines and extends existing techniques to optimize the real-world engineering problem efficiently. The procedure utilizes Kriging models for the approximation of objective functions. We use the Expected Hypervolume Improvement method for improving the Kriging models accuracy and creating the Pareto front. The calculations are parallel and asynchronous, allowing to reduce the time needed for finding the optimal designs. The algorithm is resistant to solver failures and mesh issues. We perform the optimization with a purpose to satisfy two objectives: reduction of a total pressure loss across the duct and improvement/not-worsening of a distortion coefficient at the duct outlet. To obtain the improvement, we modify the shape of the duct within limits to fulfill geometric constraints. We use 30 design variables to control the deformation of the duct surface based on radial basis function interpolation.
publisherASCE
titleAerodynamic Shape Optimization of a Gas Turbine Engine Air-Delivery Duct
typeJournal Paper
journal volume33
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001157
page04020042
treeJournal of Aerospace Engineering:;2020:;Volume ( 033 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record