Show simple item record

contributor authorTao Wang
contributor authorBohai Tan
contributor authorGuangtao Lu
contributor authorBen Liu
contributor authorDan Yang
date accessioned2022-01-30T19:07:21Z
date available2022-01-30T19:07:21Z
date issued2020
identifier other%28ASCE%29AS.1943-5525.0001147.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4264688
description abstractTo monitor bolt connection status and detect bolt looseness in engineering structures, a bolt pretightening force sensor was designed and fabricated with a strain gauge bonded on the top surface of a bolt head. The stress–strain states of the top surface of the bolt head under different pretightening forces were analyzed using the finite element method (FEM). It was found that the radial strain on the top surface of the bolt head and the pretightening force of the bolt have a good linear relationship. A bolt sensor integrated with the designed radial strain gauge on the top surface of the bolt head was designed and fabricated, and an experimental device was also set up. The experimental results showed a good linearity between the radial strain on the top surface of the bolt head and the bolt pretightening force. The FEM and experimental results demonstrate that the proposed method and the designed sensor can effectively measure the bolt pretightening force. The proposed method and sensor are a new way to monitor bolt connection status and detect bolt looseness. The proposed method is easy to implement and has good application prospects.
publisherASCE
titleBolt Pretightening Force Measurement Based on Strain Distribution of Bolt Head Surface
typeJournal Paper
journal volume33
journal issue4
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0001147
page04020034
treeJournal of Aerospace Engineering:;2020:;Volume ( 033 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record