| contributor author | Pengxin Wei | |
| contributor author | Wuxing Jing | |
| contributor author | Changsheng Gao | |
| date accessioned | 2019-09-18T10:40:40Z | |
| date available | 2019-09-18T10:40:40Z | |
| date issued | 2019 | |
| identifier other | %28ASCE%29AS.1943-5525.0001032.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4260158 | |
| description abstract | To solve the problems of a hypersonic unpowered gliding reentry vehicle controlled by only one actuator, a combination bank-to-turn control mode with a moving mass and nonredundant reaction control system (RCS), which can not only optimize the internal space of flight vehicle, but also avoid ablation of the aerodynamic control surfaces and improve control efficiency, is proposed in this paper. Firstly, a seven-degree-of-freedom dynamical model of the gliding vehicle in the period of reentry was established. The layout and control sequence of nonredundant RCS are described in detail. Taking into account coupling phenomena caused by displacement of a moving mass, a new configuration that can weaken the coupling effect is presented based on dynamics analysis. The inertial coupling and the Dutch roll coupling for the new control mode are described. On the basis of the analysis of dynamics and coupling, the attitude control system was designed by sliding mode theory. The adaptive compensation that makes the control system have high robustness to aerodynamic parameter uncertainties was designed. Finally, the simulation results are presented to demonstrate the validity of the proposed composite control mode. | |
| publisher | American Society of Civil Engineers | |
| title | Dynamics and Control for Hypersonic Gliding Vehicles Equipped with a Moving Mass and RCS | |
| type | Journal Paper | |
| journal volume | 32 | |
| journal issue | 5 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/(ASCE)AS.1943-5525.0001032 | |
| page | 06019003 | |
| tree | Journal of Aerospace Engineering:;2019:;Volume ( 032 ):;issue: 005 | |
| contenttype | Fulltext | |