| description abstract | The pressure drop in 90 deg elbows under the operating conditions of geothermal power plants in Mexico is studied using the computational fluid dynamics model. The elbow resistance coefficient was calculated for a steam flow with high Reynolds numbers (1.66–5.81 × 106) and different curvature ratios (1, 1.5, and 2). The simulations were carried out with the commercial software ANSYScfx, which considered the Reynolds-averaged Navier–Stokes (RANS) compressible equations and the renormalization group (RNG) k–ε turbulence model. First, the methodology was validated by comparing the numerical results (velocity and pressure) with published data of airflow (25 °C, 0.1 MPa) with high Reynolds numbers. Then, scenarios with different diameters (0.3–1.0 m) and conditions of the working fluid (0.8–1.2 MPa) were simulated to obtain velocity, pressure, density, and temperature profiles along the pipeline. The temperature and density gradients combined with the compressible effects achieved in the 90 deg elbows modified the flow separation, pressure drop, and resistance coefficient. Based on the resistance coefficient, factors were generated for a new equation, which was integrated into Geosteam.Net to calculate the pressure drop in a pipeline at the Los Azufres geothermal power plant. The difference with the data measured by a pressure transducer was 7.59%, while the equations developed for water or air showed differences between 11.23% and 45.22%. | |
