Show simple item record

contributor authorMalzacher, Leonie
contributor authorSchwarze, Christopher
contributor authorMotta, Valentina
contributor authorPeitsch, Dieter
date accessioned2019-09-18T09:08:08Z
date available2019-09-18T09:08:08Z
date copyright5/23/2019 12:00:00 AM
date issued2019
identifier issn0889-504X
identifier otherturbo_141_7_071012
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4259263
description abstractIn this paper, the effect of aerodynamic mistuning on stability of a compressor cascade is studied. The experiments have been carried out at a low-speed test facility of the Technische Universität Berlin. The test section contains a linear cascade with compressor blades that are forced to oscillate in sinusoidal pitching motion. The aerodynamic mistuning is realized by a blade-to-blade stagger angle variation, and three mistuning patterns have been investigated: one-blade mis-staggering, alternating mis-staggering, and random mis-staggering. Mis-staggering can have a stabilizing or destsabilizing effect, but depends strongly on the amount of detuning that alters the flow passage. For positive stagger angle variation for the one-blade and alternating mis-staggering, the trend of the damping curve was maintained, in the sense that the unstable interblade phase angles (IBPAs) remained unstable. For negative stagger angle variation, one IBPA shifted from stable to unstable. For the random pattern, only very moderate changes are observed. The cascade stability was not noticeably affected by the aerodynamic mistuning.
publisherAmerican Society of Mechanical Engineers (ASME)
titleExperimental Investigation of an Aerodynamically Mistuned Oscillating Compressor Cascade
typeJournal Paper
journal volume141
journal issue7
journal titleJournal of Turbomachinery
identifier doi10.1115/1.4043474
journal fristpage71012
journal lastpage071012-9
treeJournal of Turbomachinery:;2019:;volume 141:;issue 007
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record