| description abstract | Large-scale adaptation of solar air heating in industries and agro-processing will lead to clean energy processing as well as reducing the production cost for these industries. The solar air heater uses the principle of the greenhouse effect to heat air through the collected heat in the absorber. Among the various techniques employed by the researchers to augment heat transfer, the addition of artificial roughness elements/fins/corrugations on the heated surface is the promising one for heat transfer augmentation. In the present work, the effect of broken inclined ribs with rectangular cross-section on heat transfer and friction characteristics of the equilateral triangular passage duct has been analyzed using computational fluid dynamics. The effect of roughness parameters, viz., relative gap position and relative gap width, is being investigated for the Reynolds number (Re) ranging from 4000 to 18,000. The values of relative gap position (d/W) and relative gap width (g/e) are varied from 0.16 to 0.67 and 0.5 to 2, respectively, while a constant heat flux is supplied on the absorber side, other surfaces being insulated. The Nusselt number increased up to 2.16 times by using broken ribs than that of the smooth duct at d/W = 0.25 and g/e = 1. | |
