Show simple item record

contributor authorDavid M. Kahler; Zbigniew J. Kabala
date accessioned2019-03-10T12:03:25Z
date available2019-03-10T12:03:25Z
date issued2019
identifier other%28ASCE%29EE.1943-7870.0001479.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254764
description abstractGroundwater contamination is expensive to remediate, primarily because of the treatment time required. Increased treatment time can be caused by several contributing factors, such as sequestration in low-permeability regions of an aquifer, which can cause tailing and rebound phenomena. One such region consists of dead-end pores. Once a contaminant enters the dead-end pores, it remains in an eddy and only moves back into well-connected pores, from which it can be advected away, by molecular diffusion. A previous study with computational fluid dynamics suggested that rapidly pulsed flow demonstrated the potential to accelerate contaminant removal from dead-end pores. Here, we tested the recovery of a dissolved contaminant under steady and rapidly pulsed flow from a porous media column with crushed glass, which should have naturally formed dead-end pores. This test simulated the fluid dynamics in a flow constrained by a column without sorption; therefore, this tested the dynamics in the dead-end pores but did not include the complete dynamics of a remediation scheme. The results showed accelerated removal under rapidly pulsed flow, which is consistent with results from the computational model; however, there may be additional or alternative sources of the sequestered contaminant.
publisherAmerican Society of Civil Engineers
titleAcceleration of Groundwater Remediation by Rapidly Pulsed Pumping: Laboratory Column Tests
typeJournal Paper
journal volume145
journal issue1
journal titleJournal of Environmental Engineering
identifier doi10.1061/(ASCE)EE.1943-7870.0001479
page06018009
treeJournal of Environmental Engineering:;2019:;Volume ( 145 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record