Show simple item record

contributor authorFadida, Refael
contributor authorShirizly, Amnon
contributor authorRittel, Daniel
date accessioned2019-02-28T11:14:07Z
date available2019-02-28T11:14:07Z
date copyright2/2/2018 12:00:00 AM
date issued2018
identifier issn0021-8936
identifier otherjam_085_04_041004.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4254133
description abstractThe dynamic tensile response of additively manufactured (AM) dense and porous Ti6Al4V specimens was investigated under quasi-static and dynamic tension. The porous specimens contained single embedded spherical pores of different diameters. Such artificial spherical pores can mimic the behavior of realistic flaws in the material. It was found that beyond a certain pore diameter (Ø600 μm), the failure is determined according to the pore location, characterized by an abrupt failure and a significant decrease of ductility, while below that diameter, necking and fracture do not occur at the pore. The dynamic tensile mechanical behavior of the additively manufactured dense material was found to be similar to that of the conventional equivalent material, but the ductility to failure of the latter is observed to be higher.
publisherThe American Society of Mechanical Engineers (ASME)
titleDynamic Tensile Response of Additively Manufactured Ti6Al4V With Embedded Spherical Pores
typeJournal Paper
journal volume85
journal issue4
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4039048
journal fristpage41004
journal lastpage041004-10
treeJournal of Applied Mechanics:;2018:;volume( 085 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record