| contributor author | Solovyev, Andrey | |
| contributor author | Ionov, Igor | |
| contributor author | Lauk, Alexander | |
| contributor author | Linnik, Stepan | |
| contributor author | Shipilova, Anna | |
| contributor author | Smolyanskiy, Egor | |
| date accessioned | 2019-02-28T11:14:05Z | |
| date available | 2019-02-28T11:14:05Z | |
| date copyright | 4/12/2018 12:00:00 AM | |
| date issued | 2018 | |
| identifier issn | 2381-6872 | |
| identifier other | jeecs_015_04_044501.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4254127 | |
| description abstract | A planar solid oxide fuel cell (SOFC) was fabricated using a commercial Ni/yttria-stabilized zirconia (YSZ) anode support, an YSZ/gadolinium-doped ceria (GDC) thin-film electrolyte, and a composite cathode of La0.6Sr0.4Co0.2Fe0.8O3/Gd0.1Ce0.9O1.95 (LSCF/GDC). A small, three-cell, SOFC stack is assembled using 10 cm × 10 cm single cells, metallic interconnects, and glass-based sealing. The stack performance was examined at various fuel flow rates of H2 + N2 and air at a fixed temperature of 750 °C. The three-cell stack with a crossflow design produced peak power density of 0.216 W/cm2 or about 39 W total power at 750 °C. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Fabrication and Performance Investigation of Three-Cell SOFC Stack Based on Anode-Supported Cells With Magnetron Sputtered Electrolyte | |
| type | Journal Paper | |
| journal volume | 15 | |
| journal issue | 4 | |
| journal title | Journal of Electrochemical Energy Conversion and Storage | |
| identifier doi | 10.1115/1.4039705 | |
| journal fristpage | 44501 | |
| journal lastpage | 044501-4 | |
| tree | Journal of Electrochemical Energy Conversion and Storage:;2018:;volume( 015 ):;issue: 004 | |
| contenttype | Fulltext | |
