| contributor author | Zouch, F. | |
| contributor author | Antar, Z. | |
| contributor author | Bahri, A. | |
| contributor author | Elleuch, K. | |
| contributor author | Ürgen, M. | |
| date accessioned | 2019-02-28T11:09:23Z | |
| date available | 2019-02-28T11:09:23Z | |
| date copyright | 7/21/2017 12:00:00 AM | |
| date issued | 2018 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_140_01_011301.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4253267 | |
| description abstract | Ternary iron–tungsten–phosphorus (Fe–W–P) coatings were electrodeposited with different sodium tungstate (NaWO4·2H2O) concentration on stainless steel 316 L substrate. These coatings were characterized by energy dispersive X-ray spectrometer (EDX), scanning electron microscope (SEM), and X-ray diffraction (XRD). The friction and wear behavior of these coatings were investigated using ball-on-disk tribometer under dry conditions. This study reveals a nanocrystalline and nodular structure with nanometric grain size of the deposited alloy. The maximum level of incorporation of tungsten (W) is about 29.54 at %. It was obtained with 0.5 M of sodium tungstate concentration, and it increases the microhardness of the coatings. Moreover, it was found that Fe–W–P coatings had significantly improved the tribological properties of the substrate due to their higher wear resistance and lower friction coefficient. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Tribological Study of Fe–W–P Electrodeposited Coating on 316 L Stainless Steel | |
| type | Journal Paper | |
| journal volume | 140 | |
| journal issue | 1 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4036628 | |
| journal fristpage | 11301 | |
| journal lastpage | 011301-9 | |
| tree | Journal of Tribology:;2018:;volume( 140 ):;issue: 001 | |
| contenttype | Fulltext | |
