Show simple item record

contributor authorKhullar, Vikrant
contributor authorBhalla, Vishal
contributor authorTyagi, Himanshu
date accessioned2019-02-28T11:07:55Z
date available2019-02-28T11:07:55Z
date copyright7/19/2017 12:00:00 AM
date issued2018
identifier issn1948-5085
identifier othertsea_010_01_011009.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4253014
description abstractNanoparticle dispersions or more popularly “nanofluids” have been extensively researched for their candidature as working fluid in direct-volumetric-absorption solar thermal systems. Flexibility in carving out desired thermophysical and optical properties has lend the nanofluids to be engineered for solar thermal and photovoltaic applications. The key feature which delineates nanofluid-based direct absorption volumetric systems from their surface absorption counterparts is that here the working fluid actively (directly) interacts with the solar irradiation and hence enhances the overall heat transfer of the system. In this work, a host of nanoparticle materials have been evaluated for their solar-weighted absorptivity and heat transfer enhancements relative to the basefluid. It has been found that solar-weighted absorptivity is the key feature that makes nanoparticle dispersions suitable for solar thermal applications (maximum enhancement being for the case of amorphous carbon nanoparticles). Subsequently, thermal conductivity measurements reveal that enhancements on the order of 1–5% could only be achieved through addition of nanoparticles into the basefluid. Furthermore, dynamic light scattering (DLS) and optical measurements (carried out for as prepared, 5 h old and 24 h old samples) reveal that nanoclustering and hence soft agglomeration does happen but it does not have significant impact on optical properties of the nanoparticles. Finally, as a proof-of-concept experiment, a parabolic trough collector employing the amorphous carbon-based nanofluid and distilled water has been tested under the sun. These experiments have been carried out at no flow condition so that appreciable temperatures could be reached in less time. It was found that for the same exposure time, increase in the temperature of amorphous carbon based nanofluid is approximately three times higher as compared to that in the case of distilled water.
publisherThe American Society of Mechanical Engineers (ASME)
titlePotential Heat Transfer Fluids (Nanofluids) for Direct Volumetric Absorption-Based Solar Thermal Systems
typeJournal Paper
journal volume10
journal issue1
journal titleJournal of Thermal Science and Engineering Applications
identifier doi10.1115/1.4036795
journal fristpage11009
journal lastpage011009-13
treeJournal of Thermal Science and Engineering Applications:;2018:;volume( 010 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record