Show simple item record

contributor authorChablat, Damien
contributor authorKong, Xianwen
contributor authorZhang, Chengwei
date accessioned2019-02-28T11:04:07Z
date available2019-02-28T11:04:07Z
date copyright4/5/2018 12:00:00 AM
date issued2018
identifier issn1942-4302
identifier otherjmr_010_03_035001.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4252317
description abstractMost multimode parallel robots can change operation modes by passing through constraint singularities. This paper deals with a comprehensive kinematic study of a three degrees-of-freedom (DOF) multimode three-PRPiR parallel robot developed at Heriot-watt University. This robot is able to reach several operation modes without crossing any constraint singularity by using lockable Pi and R joints. Here, a Pi joint may act as a 1DOF planar parallelogram if its lockable P (prismatic) joint is locked or a 2DOF RR serial chain if its lockable P joint is released. The operation modes of the robot include a 3T operation mode and four 2T1R operation modes with two different directions of the rotation axis of the moving platform. The inverse kinematics and forward kinematics of the robot in each operation mode are dealt with in detail. The joint space and workspace analysis of the robot allow us to know the regions of the workspace that the robot can reach in each operation mode. It is shown that the robot is able to change assembly mode in one operation mode by passing through another operation mode.
publisherThe American Society of Mechanical Engineers (ASME)
titleKinematics, Workspace, and Singularity Analysis of a Parallel Robot With Five Operation Modes
typeJournal Paper
journal volume10
journal issue3
journal titleJournal of Mechanisms and Robotics
identifier doi10.1115/1.4039400
journal fristpage35001
journal lastpage035001-12
treeJournal of Mechanisms and Robotics:;2018:;volume( 010 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record