Show simple item record

contributor authorEiamsa-Ard, S.
contributor authorSamravysin, P.
date accessioned2019-02-28T11:00:39Z
date available2019-02-28T11:00:39Z
date copyright7/23/2018 12:00:00 AM
date issued2018
identifier issn0022-1481
identifier otherht_140_11_114501.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251693
description abstractThis paper deals with the influence of overlapped-quadruple twisted tape (OQT) and typical quadruple twisted tape (QT) on the enhancing heat transfer rate in a heat exchanger tube. The effects of tube orientation (co-tapes and counter tapes), tape arrangement (cross and parallel arrangements), and overlapped twist ratio (yo/y = 0.625, 0.75, and 0.875) were investigated. The experiments were performed in the turbulent flow regime (5000 ≤ Re ≤ 20,000) under uniform wall heat flux boundary condition, using air as the testing fluid. The experimental results indicates that all OQTs consistently yield higher Nusselt number and thermal performance than QTs. The tapes in cross arrangement show better heat transfer enhancement and thermal performance than the ones in parallel arrangement. Heat transfer, friction loss, and thermal performance increase with decreasing overlapped twist ratio. The maximum thermal enhancement factor (TEF) of 1.58 is achieved by the use of overlapped-quadruple counter tapes in cross arrangement (CC-OQTs) with yo/y = 0.625 at the lowest Reynolds number of 5000.
publisherThe American Society of Mechanical Engineers (ASME)
titleCharacterization of Heat Transfer by Overlapped-Quadruple Counter Tapes
typeJournal Paper
journal volume140
journal issue11
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4040785
journal fristpage114501
journal lastpage114501-6
treeJournal of Heat Transfer:;2018:;volume( 140 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record