Show simple item record

contributor authorAlidoost, Mohammadali
contributor authorReza Pishevar, Ahmad
date accessioned2019-02-28T10:59:11Z
date available2019-02-28T10:59:11Z
date copyright6/13/2018 12:00:00 AM
date issued2018
identifier issn0098-2202
identifier otherfe_140_12_121201.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251439
description abstractIn the present study, the deformation of a droplet is numerically modeled by considering the dynamic model for electric charge migration at the drop interface under the effect of a uniform electric field. The drop and its ambient are both considered behaving as leaky dielectric fluids. Solving the charge conservation equation at the interface, which is the most important part of this study, the effect of conduction and convection of charges on different deformation modes will be explored. In this work, the interface is followed by the level set method and the ghost fluid method (GFM) is used to model the jumps at the interface. Physical properties are also chosen in a way that solving the charge conservation equation becomes prominent. The small drop deformation is investigated qualitatively by changing various effective parameters. In cases, different patterns of charges and flows are observed indicating the importance of electric charges at the interface. It is also shown that the transient behavior of deformation parameter can be either a monotonic or a nonmonotonic approach toward the steady-state. Moreover, large drop deformations are studied in different ranges of capillary numbers. It will be shown that for the selected range of physical parameters, considering the dynamic model of electric charges strongly affects the oblate deformation. Nevertheless, for the prolate deformation, the results are approximately similar to those obtained from the static model.
publisherThe American Society of Mechanical Engineers (ASME)
titleOn Importance of the Surface Charge Transport Equation in Numerical Simulation of Drop Deformation in a Direct Current Field
typeJournal Paper
journal volume140
journal issue12
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4040301
journal fristpage121201
journal lastpage121201-16
treeJournal of Fluids Engineering:;2018:;volume( 140 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record