Show simple item record

contributor authorBrachman Richard W. I.;Rowe R. Kerry;Take W. Andy
date accessioned2019-02-26T07:50:42Z
date available2019-02-26T07:50:42Z
date issued2018
identifier other%28ASCE%29GT.1943-5606.0001985.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4249786
description abstractReductions in geosynthetic clay liner (GCL) panel overlap are reported for two needle-punched and thermally treated GCLs (GCL1 and GCL2) and compared with values for two other needle-punched but not thermally treated GCLs (GCL3 and GCL4) at the same field-scale test site. The GCLs were covered only by a black geomembrane and otherwise left exposed to study the implications of leaving the composite liner exposed for nearly 5 years on reductions in the overlapped seams between adjacent GCL panels. It was found that all but GCL2 experienced a significant reduction in overlap. After 4.8 years, GCL2 experienced the smallest overlap reductions of only 3 mm (i.e., 9% of the initial 3 mm panel overlap remained), GCL3 overlaps were reduced by 75 mm, whereas GCL1 and GCL4 had the largest reductions with values greater than 6 and 4 mm, respectively, after 4.8 years. Overlap reductions appear to correlate with reference water content and overlap adhesion, which are two laboratory indices affected by confinement and texture of the four GCLs resulting from subtle, but, distinct differences in the method of manufacture.
publisherAmerican Society of Civil Engineers
titleReductions in GCL Overlap Beneath an Exposed Geomembrane
typeJournal Paper
journal volume144
journal issue12
journal titleJournal of Geotechnical and Geoenvironmental Engineering
identifier doi10.1061/(ASCE)GT.1943-5606.0001985
page4018094
treeJournal of Geotechnical and Geoenvironmental Engineering:;2018:;Volume ( 144 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record