Show simple item record

contributor authorJia Ziguang;Ren Liang;Li Hongnan;Wu Wenlin;Jiang Tao
date accessioned2019-02-26T07:34:28Z
date available2019-02-26T07:34:28Z
date issued2018
identifier other%28ASCE%29AS.1943-5525.0000880.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4247999
description abstractPipelines provide a convenient mode of transportation of fluids, and their safe usage is one of the foremost concerns. In our previous work, a hoop strain–based negative pressure wave (NPW) approach was proposed to detect and localize pipeline leakages by employing a series of bare fiber Bragg grating (FBG) sensors. To enhance the leakage detection capability especially for small leakage rate cases, a FBG hoop strain sensor with adjustable sensitivity has been developed to measure the pressure drop induced by pipeline leakage. This paper analyzes the performance of the developed FBG hoop strain sensors with consideration of NPW energy attenuation. The detectable range [xR] of each hoop strain sensor is investigated, and thus the sensor quantity can be determined. A case study is conducted on a 32-km pressurized pipeline to demonstrate the analysis procedure, with further discussion of different pipeline parameters’ influences on [xR]. The results show that the smallest detectable leakage rate can be enhanced at least 3% by setting mounts of sensors. The most effective way to enhance the overall performance of the leakage detection system is to develop higher-sensitivity FBG hoop strain sensors.
publisherAmerican Society of Civil Engineers
titlePerformance Study of FBG Hoop Strain Sensor for Pipeline Leak Detection and Localization
typeJournal Paper
journal volume31
journal issue5
journal titleJournal of Aerospace Engineering
identifier doi10.1061/(ASCE)AS.1943-5525.0000880
page4018050
treeJournal of Aerospace Engineering:;2018:;Volume ( 031 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record